Vertical Electric Heaters with Infrared Hybrid Technology
VASNER Konvi VE

New Hybrid Vertical Electric Heaters – When Space Is at a Premium.

There isn‘t always enough space on the wall to mount an infrared heating panel horizontally. Especially in bathrooms and other tight areas, only narrow sections of wall are often available. Konvi VE hybrid vertical electric heaters are specifically designed for heating small rooms. With a width of just 60 cm, the products can be mounted on virtually any narrow section of wall. You can choose between different models in black and white to perfectly integrate the device into your existing decor. Finally enabling you to enjoy the cosy warmth and other benefits of hybrid infrared convection technology in every room of your home.

900 watt model in black

Black vertical electric heater with infrared and convection

900 watt model in white

Vertical electric heaters 1000 watts

New Product Features

  • Narrow, space-saving vertical design
  • Efficient infrared radiant warmth
  • Additional convection
  • With convection fins for higher thermal efficiency than comparable hybrid heaters on the market
  • Quicker temperature increase
  • More efficient use of energy
  • Ideal heater for basements, attics
  • No dry room air
  • Integrated thermostat dial
  • Stepless temperature control
  • IP22 protection against dripping water falling at an angle (up to 15°)
  • Available in white and black
  • ATTENTION: Konvi VE series NOT suitable as a stand-up heater with feet (risk of tipping over)!
  • Heats silently without a fan
  • 3 year warranty
  • Tested – Fulfil radiation efficiency according to DIN EN IEC 60675-3
Vertical electric heaters with infrared + convection

Price: 299 – 369,-€

The Vertical Designer Radiator with Dual Efficiency
Infrared Meets Convection.

As of now, you no longer have to choose between the two proven heating techniques. Konvi hybrid vertical electric heaters combine infrared and convection warmth, resulting in double the heating efficiency. Unlike conventional wall mounted infrared panels, the sturdy casing of the vertical heating element has ventilation slots on the top and bottom as well as heating fins on the inside. So, in addition to the direct infrared radiant warmth, the room air is also heated via convection by the electric radiators. Of course the slim designer heaters still emit the same degree of infrared warmth into the room as standard radiant panels. However, the infrared rays are used on the inside of the vertical wall heater as well, to create warm room air. This sophisticated combination paves the way for a quicker and more energy efficient heating process. Thanks to their advanced hybrid method, the new Konvi VE vertical electric heaters create a cosy room climate in nearly no time via convection and additional infrared warmth.

Vertical wall heater with infrared + convection
Hybrid infrared electric heater for quicker warmth

Heating Fins for More Efficient Hybrid Vertical Electric Heaters

Not all hybrid technology is equally efficient. VASNER vertical electric heaters have a feature that increases their thermal efficiency by up to 34% compared to cheaper models. Heating fins inside the device offer a larger heating surface in order to simultaneously warm up the room air more quickly. The trapezoidal metal sheets thus ensure a faster chimney effect by heating the air more efficiently from the bottom to the top.

VASNER heating fins – The hidden quality feature for even faster hybrid heating.

Hybrid Vertical Electric Heaters with Thermostat Control

Another advantage of Konvi VE hybrid vertical electric heaters is their integrated thermostat dial for easy temperature control. The thermostat rotary knob is steplessly adjustable, enabling a precise temperature regulation. Once you’ve set a target temperature, the hybrid infrared heating panel maintains it automatically. Only interrupting the heating process whenever your comfort temperature is reached. The LED status light on the side of the vertical electric heater indicates whether the device is currently operating or not. Its complete independence, high energy efficiency, quick installation and narrow, robust design make the Konvi VE room heater popular for use in areas of all kinds. The perfect heat source for all indoor living spaces, conservatories, hobby rooms, holiday homes and more. For efficient use according to Ecodesign Directive 2009/125/EC and Regulation (EU) 2015/1188 combine the panel heater with a programmable thermostat.

Infrared electric heater with thermostat in black

Regulation with a Programmable Thermostat

The Konvi hybrid vertical electric heater has a built-in mechanical thermostat. Within the scope of Regulation (EU) 2015/1188, electric room heaters must be controlled and operated via electronic room temperature controllers (thermostats) with a “weekday control” and “window-open-detection” function or “adaptive control of the start of heating”. For example, with the matching thermostat set VASNER VFTB you can optimally control infrared heating panels. As the hybrid heater has an open interface, you can either use your own thermostat system, which may already be in use in your building, or use our VFTB thermostat set. In case of operation via an electronic thermostat, the mechanically integrated thermostat of the Konvi heater must always be set to its highest level (ON)! You can find the VFTB room thermostat set here. >>

Quick and Easy Mounting of Vertical Electric Heaters on the Wall

In just 10 minutes, Konvi VE vertical electric heaters can be installed on the wall. To do so, simply mount the included wall brackets using the 4 provided dowels and screws and then slide the vertical heater into place. Done! The autonomous infrared heating system can be used right away.

Hybrid panel heater ultra-flat black housing

Ultra-flat housing

Vertical electric heaters wall mounted

Mounted on the wall quickly and safely

Vertical electric heater with thermostat in black

Easy and flexible temperature control

Available Models of Konvi VE Hybrid Vertical Electric Heaters

Vertical electric heater sizes

Output and Sizes (H x W x D):

  • 900 watts / white or black
    100 x 60 x 4,3 cm

  • 1200 watts / white or black
    140 x 60 x 4,3 cm

Vertical electric heaters in black with 1000 - 1200 watts

Vertical Panel Heater Hybrid with Efficient Infrared Technology

VASNER focuses on durability and efficiency. This is especially valued by our customers who attach great importance to high quality heating filaments. For Konvi VE vertical electric heaters and all other horizontal heating panels by VASNER, only the best infrared technology is used. Their high-quality processing can be felt from the very first use. The warmth emitted by the hybrid panel heaters is especially even and intense. The secret of VASNER quality is hidden in the details. Latest infrared technology for more energy efficiency and quicker warmth.

Permanent Connection to the Mains Supply
Removing the Power Plug of Vertical Electric Heaters

Naturally, Konvi VE vertical electric heaters can be connected directly to the power supply. In case you would like to flush-mount the electric heating element without any visible cables. To do so, the power cord of the device must simply be cut and properly connected to the electricity supply by a professional. As long as this is done by a specialist, the 2 year warranty of your infrared panel will remain valid. A direct connection of the heater to the mains may only be carried out in accordance with the legal guidelines by means of digital control and by an authorised person (master electrician).

Vertical Electric Heaters in Elegant Black or White
Now Also Paintable in Any Other Colour

The quality vertical electric heaters are powder coated in black or white, in order to guarantee a more resistant and robust surface. At the same time, the elegant finish helps the flat wall heater blend in seamlessly with its surroudings. If you prefer a different colour, you can paint the infrared panel in the shade of your choice with special radiator paint. However, only compatible radiator paint may be used! Not conventional paint! Please also ensure that no paint enters the housing of the electric designer heater, so the additional convection can take place as efficiently as possible. VASNER Konvi VE – Vertical designer radiators for discreet heating or a splash of colour on your wall.

VASNER Konvi VE vertical electric heaters – the exclusive hybrid infrared panel in a sleek design. Now available in VASNER’s online shop for home and garden accessories!

VASNER – A piece of home. 

Information on Output and Power Consumption

Maximum efficiency: approx. 99% of the electrical energy used is converted into thermal output.

The ErP table for this electric heating panel can be found in the section: PDF Download.

To estimate the wattage required to heat each m², please use our online calculator >>

Do you have any questions concerning the Konvi VE vertical designer radiator? Please contact the VASNER service team! We’re looking forward to hearing from you: +49 (0)5246 – 93 55 625

Radiation Efficiency VASNER

The radiation efficiency of our infrared panel heater series clearly exceeds the required 40%.
We will be happy to provide you with the exact values of our individual models on request.

Info – as currently decided in the IG-Infrared association:
Values that exceed the required 40% have only little significance within the scientific standard with regard to a “better / more efficient effect” of the heaters. Therefore, we refrain from declaring our higher values individually as an “efficiency statement”.

The radiation efficiency of VASNER infrared panel heaters was determined by the Technical University of Dresden on behalf of VASNER in accordance with the test guideline DIN EN IEC 60675-3.

Customer Photos of Konvi VE Vertical Electric Heaters in Use