VASNER Citara M RX Radio Panel Heater with Integrated Radio Receiver

Radio Panel Heater | VASNER Citara M RX

Product Features

• Infrared panel heater with integrated radio receiver
• For combination with the separately available RX radio thermostat transmitter
• No more need for external thermostat systems and receivers thanks to integrated radio receiver
• Models: 300 / 450 / 550 / 700 / 900 / 1100 watts
• Very flat with a housing depth of 2,5 cm
• Latest infrared heating technology
• Efficient, even radiant heat
• Design: White, silk-matt powder coating
• Incl. wall / ceiling bracket
• IP44 splash water protection for bathroom
• Rear insulation: 2,5 cm
• Overheating protection
• Certifications: EMC, REACH, RoHS
• Digital tilt protection with off function (activated on delivery of the device. Depending on the type of installation, the anti-tilt protection must be deactivated before operation.)
• 5-year warranty
• Tested - Fulfil radiation efficiency according to DIN EN IEC 60675-3

Description

With the Citara M RX series, VASNER presents an infrared panel heater with an integrated radio receiver. The built-in radio module allows the heating panel to be regulated using the optionally available RX thermostat transmitter. Entirely without additional external thermostat systems, thermostat receivers or socket thermostats. This means that you do not have to insert a flush-mounted box / receiver, which keeps both installation effort and dirt to a minimum and allows the infrared panel heater to be used as flexibly as possible. With the new VASNER RX radio system, connecting, arranging and operating infrared heating panels in any room becomes an easy plug & play process. Commissioning infrared panel heaters has never been so quick and easy.

At first glance, the Citara M RX heating panel looks just like the existing Citara M metal panel heater by VASNER. Ultra-flat and with an elegant powder coating in white, it nestles against the wall or ceiling to save space and blend in with its surroundings. The only difference between the two series is the compact radio unit on the back of the Citara M RX heating panel. The module has a button to establish a radio connection with the thermostat transmitter, a heating indicator, a radio connection signal and a mains switch to turn off the electric heater. It is also possible to deactivate the radio connection and switch into manual operating mode in order to control the infrared heating panel with another external thermostat system of your choice.

The latest infrared heating technology is incorporated behind the entire white surface of the Citara M RX. The high-quality infrared fibres ensure high thermal efficiency with a surface temperature of up to approx. 110°C. This enables a significantly higher radiant heat than most infrared panel heaters on the market. Feel the even and sun-like warmth of the Citara RX series. The individual models in the series have an optional output of 300 - 1100 watts and, thanks to IP44 splash water protection, can be used anywhere in the house - even in damp rooms such as the bathroom. With its integrated overheating protection, the radio panel heater offers maximum safety during use.

Note: If the batteries in the RX thermostat transmitter are low, the display may not be updated and this may affect the heating process. If the same room temperature and time are constantly displayed, please change the batteries.

NEW: Digital tilt protection / off function

For maximum safety, Citara M RX infrared panel heaters by VASNER have a digital tip-over protection with an off function. This feature is activated ex factory and is especially important for models used as a mobile heat source together with additionally available feet. In the event of a position change beyond 60°, the automatic switch-off function immediately interrupts the heating process until the Citara M RX is back in an upright position. Depending on the type of installation, the anti-tilt protection must be deactivated before operation. With this extra digital safety function, VASNER is a pioneer in the market for safe infrared heating panels. So that you can enjoy the cosy warmth of your Citara M RX in peace.

Radiant Efficiency VASNER

The radiant efficiency of our infrared heating panels significantly exceeds the required 40%.

Note from the European Infrared Heating Alliance (EIHA):
Radiant efficiency depends on various influencing factors. These include the size of an infrared panel heater, the type of installation (wall/ceiling), and the test setup in the respective testing institute. The pure percentage value alone is not meaningful without considering these factors.
The radiant efficiency tested according to DIN EN IEC 60675-3 at TU Dresden averages over 50% (wall-mounted) and over 60% (ceiling-mounted). This far exceeds the standard requirement (40%).

The radiation efficiency of VASNER infrared panel heaters was determined by the Technical University of Dresden on behalf of VASNER in accordance with the test guideline DIN EN IEC 60675-3.

Details on the Use of the Infrared Heating Panel

Efficient Control via Thermostat:

• The Citara M RX is controlled electronically via radio with maximum efficiency and flexibility using the RX radio thermostat transmitter.
• Simple connection of heater and transmitter at the touch of a button
• The RX thermostat transmitter is sold separately and is not automatically included with the heater(s) (see accessories)
• Advantages of the RX programmable thermostats:
• Manual temperature control, automatic temperature control according to time & day, manual intervention at any time even during automatic control, frost protection function, open window detection, calibration function.
• 2 selectable automatic programming schemes
• Mon. - Fri. + Sat. - Sun.
  (Group 1: Mon-Fri. with 4 switching times per day. Identical for all weekdays. Group 2: Sat.- Sun. with 4 switching times per day, which are identical for both days).
• 7-day programming (Mon. - Sun. with 4 switching times per day, which can be set individually for each day).
• Integrated stand, can be folded out
• Can be used flexibly as a wall or free-standing thermostat
• Note: Use one RX radio thermostat transmitter per room!

Models & Design:

• Ultra-flat (panel 2,5 cm deep + wall bracket: 2,8 cm deep)
• Colour: White, RAL 9003
• Material: Metal, steel
• Dimensions (H x W x D):
• 300 watts: 60 x 40 x 2,5 cm
• 450 watts: 60 x 60 x 2,5 cm
• 550 watts: 40 x 120 x 2,5 cm
• 700 watts: 60 x 90 x 2,5 cm
• 900 watts: 60 x 120 x 2,5 cm
• 1100 watts: 60 x 140 x 2,5 cm

Heating Technology:

Heating Filament:

• Latest infrared technology
• Twin heat conductor technology
• Advantages:
• Serpentine layout: No generation of additional magnetic fields
• Incorporation of the heating filament up to the edges of the panel heater
• Uniform surface temperature of the panel
• Efficient heat radiation
• No hot spots with higher temperatures

Rear Insulation:

• High-quality, backside insulation + heat reflector
• Mineral thermal insulation layer: 2,5 cm
• Aluminum reflector
• Rear side temperature approx. 38 to 55°C. Depending on the type of installation, whether on the wall or under the ceiling.
• Targeted heat reflection forward into the room
• Energy / heat loss to the rear minimized
• Highly efficient and safe

Type of Infrared Radiation:

• Long-wave infrared C radiation

IP Protection

• IP44 protection from splashing water coming from all sides (for bathrooms) when plugged in or permanently connected to the power supply

Application Areas:

• Closed indoor areas
• Bathroom
• Bedroom
• Living room
• Kitchen / dining room
• Children's room
• Insulated basement
• Insulated attic
• Hobby room
• Office
• Conservatory
• Garden house
• Vacation home
• Tiny house
• Caravan

Safety Functions:

• Overheating protection (thermal switch)
• Digital tilt protection with off function (this feature is activated when the appliance is delivered - depending on the type of installation, the anti-tilt protection must be deactivated before operation)

Heating Area:

• Use exclusively in closed interior spaces
• Example values shown based on good room insulation with a heating requirement of 50 watts/m²:
• 300 watts: up to approx. 6 m²
• 450 watts: up to approx. 9 m²
• 550 watts: up to approx. 11 m²
• 700 watts: up to approx. 14 m²
• 900 watts: up to approx. 18 m²
• 1100 watts: up to approx. 22 m²
• Data and calculations of heating areas are always dependent on several influencing factors, for example structural conditions such as ceiling height, room size, insulation, energetic conditions / building fabric, number of external walls etc.

Mounting:

• Ideally suited for wall / ceiling mounting
• 700-1100 watt models compatible with Citara supporting feet
• Incl. patented mounting bracket
• Fasten the bracket to the ceiling / wall with the supplied screws and dowels.
• Slide heater in place + turn safety bracket
• Safe, simple installation
• Ideal position: Opposite the desired heating area in max. 3 - 4 m. distance

Current Load and Fuse:

• A standard household power line delivers about 3,5 kW at 16 amperes.
• Citara M RX infrared panel heaters have an output of 300 - 1100 watts = 0,3 - 1,1 kW.
• Multiple heating panels can be connected per circuit.
• For simultaneous operation together with several other electrical devices in the same area, a second supply line may be necessary, depending on the total load.
• An additional power line can be installed by a qualified electrician.

Safety Distance to Flammable Materials:

• To the front: 30 cm
• Upwards / downwards + to each side: 10 cm
• 60 cm to water sources

Heating Costs:

At an average electricity price of 29 cents per kWh:

• 300 watts: 0,29 € / kWh * 0,3 kW ≈ 0,09 € / h ≈ 9 cents per hour
• 450 watts: 0,29 € / kWh * 0,45 kW ≈ 0,13 € / h ≈ 13 cents per hour
• 550 watts: 0,29 € / kWh * 0,55 kW ≈ 0,16 € / h ≈ 16 cents per hour
• 700 watts: 0,29 € / kWh * 0,7 kW ≈ 0,20 € / h ≈ 20 cents per hour
• 900 watts: 0,29 € / kWh * 0,9 kW ≈ 0,26 € / h ≈ 26 cents per hour
• 1100 watts: 0,29 € / kWh * 1,1 kW ≈ 0,32 € / h ≈ 32 cents per hour

Note: Fixed Connection / Power Plug

• For a permanent connection to the mains, the power plug must be disconnected.
• The warranty of the device remains valid.
• A direct connection of the heater to the mains may only be carried out in accordance with the legal guidelines by means of digital control and by an authorised person (master electrician).

Note:

Maximum efficiency: Approx. 99% of the electrical energy used is converted into thermal output.

To estimate the wattage required to heat each m², please use our online calculator >>

The ErP table for this electric heating panel can be found in the section "Downloads".

Technical Data

• Product: VASNER Citara M RX radio panel heater
• Colour: RAL 9003 Signal white, Silky gloss
• Performance: 300 // 450 // 550 // 700 // 900 // 1100 watts
• Measurements (H x W x D): 40 x 60 x 2,5 cm // 60 x 60 x 2,5 cm // 40 x 120 x 2,5 cm // 60 x 90 x 2,5 cm // 60 x 120 x 2,5 cm // 60 x 140 x 2,5 cm
• Weight: 4,75 kg // 6,65 kg // 7 kg // 9,05 kg // 11,49 kg // 13,59 kg
• Heat radiation range/-angle: up to 3,5 m, up to 170°
• Integrated mains adapter
• Power plug: Shockproof plug
• For a permanent connection to the mains, the plug must be disconnected by a qualified professional. The warranty will remain valid. A direct connection of the heater to the mains may only be carried out in accordance with the legal guidelines by means of digital control and by an authorised person (master electrician).
• Cable length: 1,7 m
• Voltage: 230V / 50 Hz
• IP-Safety class: IP44 (proctection from splashing water from all sides)
• Digital tilt protection with off function (this feature is activated when the appliance is delivered - depending on the type of installation, the anti-tilt protection must be deactivated before operation)
• Overheating protection: Yes, safety switch
• Surface temperature: up to approx. 110°C
• Rear side temperature approx. 38 to 55°C. Depending on the type of installation, whether on the wall or under the ceiling.
• Heat radiation type: Long-wave, far infrared C radiation
• Rear insulation: 2,5 cm
• Heatable area: Depending on the model, up to max. 20 square metres with one panel
• Body: Metal
• Mount: Patented system for wall and ceiling mounting
• Depth of wall bracket: 2,8 cm
• Total depth (device incl. bracket): 5,3 cm
• Nominal heat-up time: 4,08 min.
• Nominal heat output (Pnom): 300 watts: 0,3 kW | 450 watts: 0,45 kW | 550 watts: 0,55 kW | 700 watts: 0,7 kW | 900 watts: 0,9 kW | 1100 watts: 1,1 kW
• Maximum continuous heat output (Pmax,c): 300 watts: 0,3 kW | 450 watts: 0,45 kW | 550 watts: 0,55 kW | 700 watts: 0,7 kW | 900 watts: 0,9 kW | 1100 watts: 1,1 kW
• Auxiliary power consumption at nominal heat output: 300 watt model: 0,314 kW | 450 watt model: 0,476 kW | 550 watt model: 0,572 kW | 700 watt model: 0,728 kW | 900 watt model: 0,935 kW | 1100 watt model: 1,184 kW
• Protection class: I
• Rated current consumption in amperes: 300 watts: 1,30 A | 450 watts: 1,95 A | 550 watts: 2,39 A | 700 watts: 3,04 A | 900 watts: 3,91 A | 1100 watts: 4,78 A
• Maximum efficiency: approx. 99% of the electrical energy used is converted into thermal output.
• Effective heating surface (m²): » 300 watts: 0,24 m² | 450 watts: 0,36 m² | 550 watts: 0,48 m² | 700 watts: 0,54 m² | 900 watts: 0,72 m² | 1100 watts: 0,96 m²
• Operating frequency of the radio system: 433,4 MHz
• Certifications: EMC, REACH, RoHS

The product is suitable for use as a heating system for buildings and living spaces in accordance with the requirements of Bill 19/16716 Art. 1 §23 Paragraph 1 No. 3 GEG and the Ecodesign Directive 2015/1188/EC in conjunction with an external control system. This product is only suitable for well-insulated rooms or occasional use. This product is not suitable as a main heating system. As a distributor, we are obliged under the Ecodesign Directive to supply each individual room heater with a control. If you do not enclose a control with your order, a standard version that complies with the directive will automatically be enclosed. According to the Ecodesign Directive 2009/125/EC and Regulation (EU) 2015/1188, electric room heaters may only be installed, controlled and operated together with a digital thermostat control with the function "weekday control" and "window-open detection" or "adaptive control of the start of heating". For example, with the matching RX radio thermostat transmitter, you can optimally control VASNER RX radio panel heaters. You can find the thermostat transmitter under accessories. 

Delivery Contents

• 1 x Citara M RX radio panel heater
• 1 x Patented wall / ceiling mount
• 1 x Mounting kit (dowels 10 x 52 mm & screws)
• 1 x User manual
• 1 x Integrated power cord

VASNER
MankeTech GmbH
Stahlstraße 27
33415 Verl, Germany
Mail: info@vasner.com