VASNER Konvi Hybrid Infrared Panel Heater

Hybrid Infrared Panel Heater | VASNER Konvi

Product Features

• Combination of infrared warmth and convection
• Hybrid heating efficiency – even quicker warmth
• Additional convection fins for higher thermal efficiency compared to similar hybrid heaters on the market
• 100% infrared technology
• Models: 600 / 900 / 1200 watts
• Highly energy efficient
• Integrated thermostat
• Stepless temperature control
• Flat casing: Only 4,3 cm deep!
• With a flat wall mount
• Integrated overheating protection
• IP22 protection against dripping water falling at an angle (up to 15°)
• Can be used as a mobile heater with additionally available stands
• Heats silently without a fan
• 3 year warranty
• Tested - Fulfil radiation efficiency according to DIN EN IEC 60675-3

Description

With its Konvi hybrid infrared panel heaters, VASNER presents a space-saving heating solution with dual heating power. Thanks to the elaborate combination of cosy infrared warmth and proven convection technology, the hybrid heating panel quickly creates a pleasant temperature in your home. The electric wall heater with latest, efficient infrared heating technology emits direct, sun-like radiant waves, while the room air is additionally heated on the inside of the unit. Depending on the size of your room, you can purchase the innovative hybrid panel heaters with an output of 600, 900 or 1200 watts. The integrated thermostat allows for a stepless temperature regulation thanks to its practical rotary knob. Despite its impressive warmth output and dual heating technology, the hybrid infrared heater is surprisingly slim. With a housing depth of only 4,3 cm, it blends into the wall and can be easily mounted in the desired place using the included VASNER bracket. If you are looking for a mobile heat source, you can purchase additional feet for the VASNER Konvi. This allows the hybrid panel heater to be used even more flexibly. For additional safety, the advanced hybrid heater is equipped with overheating protection.

What is the difference between Konvi and Konvi Plus hybrid infrared heating panels?

The difference between the angular Konvi series and the rounded Konvi Plus series is purely visual. In terms of technology, effect and efficiency, both series are completely identical. With regard to heating power, there is no difference between the Konvi and Konvi Plus if the wattage of the compared units is identical.

The Original by VASNER

Efficient hybrid infrared panel heaters have become popular thanks to VASNER. What makes the Konvi hybrid so special and how do VASNER hybrid infrared heating panels differ from other models on the market? It is the internal technology in combination with the trapezoidal convection plates, which other cheap hybrid heaters on the market often lack. Precisely because this inner technology is not visible, it is often omitted. However, this internal feature makes a big difference to the overall efficiency and is what makes VASNER hybrid infrared heaters such great heat sources. Quality really pays off.

Note: Fixed Connection / Power Plug

• For a permanent connection to the mains, the power plug must be disconnected.
• The warranty of the device remains valid.
• A direct connection of the heater to the mains may only be carried out in accordance with the legal guidelines by means of digital control and by an authorised person (master electrician).

Further notes

Maximum efficiency: Approx. 99% of the electrical energy used is converted into thermal output.

The VASNER Konvi is the high-quality and effective heater for additional, cosy radiant warmth in living spaces. To estimate the wattage required to heat each m², please use our online calculator >>.

The ErP table for this electric heating panel can be found in the section "Downloads".

Details on the Use of the Infrared Heating Panel

Optional: Automated control via digital thermostat:

• The hybrid infrared panel heater can also be controlled with an electronic thermostat in order to define individual heating programmes.
• If an electronic thermostat is also used, the mechanically integrated thermostat of the heating panel must always be set to the highest level (ON).
• Digital thermostat is not included (see accessories)
• Advantages of programmable thermostats: Automatic temperature change according to time & day, individually programmable + standard heating programs, quick selection settings, frost protection function
• Panel heaters have an open interface, i.e. they are compatible with every thermostat system
• Also ideal for integration into smart home environments
• The heating panel is compatible with thermostats of other manufacturers.
• Matching VASNER thermostats:
• VFTB wireless thermostat set
• VUT35 universal socket thermostat
• VFT35 wireless thermostat set

Models & Design:

• Flat (panel 4,3 cm deep + wall bracket: 2 cm deep)
• With air slits for additional convection
• With thermostat knob
• Colour: White, RAL 9003
• Material: Metal, steel
• Dimensions (H x W x D):
• 600 watts: 60 x 60 x 4,3 cm
• 900 watts: 60 x 100 x 4,3 cm
• 1200 watts: 60 x 140 x 4,3 cm

Heating Technology: Infrared + Convection

Heating Filament:

• Latest infrared technology
• Twin heat conductor technology
• Advantages:
• Serpentine layout: No generation of additional magnetic fields
• Incorporation of the heating filament up to the edges of the panel heater
• Uniform surface temperature of the panel
• Efficient heat radiation
• No hot spots with higher temperatures

Convection:

• Openings at the bottom and top of the heater to let room air through
• Hollow space inside the device through which the air rises
• Special convection plates in the heater for even faster / more efficient heating of the air

Type of Infrared Radiation:

• Long-wave infrared C radiation

IP Protection

• IP22 protection against dripping water falling at an angle (up to 15°)

Application Areas:

• Closed indoor areas
• Bathroom (with enough distance to water sources)
• Bedroom
• Living room
• Kitchen / dining room
• Children's room
• Insulated basement
• Insulated attic
• Hobby room
• Office
• Conservatory
• Garden house
• Vacation home
• Tiny house
• Caravan

Safety Functions:

• Overheating protection max. 130°C (safety thermoswitch)

Heating Area:

• Use exclusively in closed interior spaces
• Example values shown based on good room insulation with a heating requirement of 50 watts/m²:
• 600 watts: up to approx. 12 m²
• 900 watts: up to approx. 20 m²
• 1200 watts: up to approx. 24 m²
• * Data and calculations of heating areas are always dependent on several influencing factors, for example structural conditions such as ceiling height, room size, insulation, energetic conditions / building fabric, number of external walls etc.

Mounting:

• Ideally suited for wall mounting
• Incl. matching mounting bracket
• Fasten the bracket to the wall with the supplied screws and dowels.
• Slide heater in place
• Ideal position: Opposite the desired heating area in max. 3 - 4 m. distance

Current Load and Fuse:

• A standard household power line delivers about 3,5 kW at 16 amperes.
• Konvi infrared panel heaters have an output of 600 - 1200 watts = 0,6 - 1,2 kW.
• Multiple heating panels can be connected per circuit.
• For simultaneous operation together with several other electrical devices in the same area, a second supply line may be necessary, depending on the total load.
• An additional power line can be installed by a qualified electrician.

Safety Distance to Flammable Materials:

• To the front: 30 cm
• Upwards / downwards + to each side: 10 cm
• 60 cm to water sources

Heating Costs:

At an average electricity price of 29 cents per kWh:

• 600 watts: 0,29 € / kWh * 0,6 kW ≈ 0,17 € / h ≈ 17 cents per hour
• 900 watts: 0,29 € / kWh * 0,9 kW = 0,26 € / h = 26 cents per hour
• 1200 watts: 0,29 € / kWh * 1,2 kW ≈ 0,35 € / h ≈ 35 cents per hour

Technical data

• Article: VASNER Konvi hybrid infrared panel heater
• Colour: RAL 9003 signal white, silky gloss
• Voltage: 230V / 50 Hz
• Output: 600 watts // 900 watts // 1200 watts
• Thermostat: integrated, rotary knob for stepless temperature control
• Max. surface temperature: approx.120°C
• Dimensions (H x W x D): 60 x 60 x 4,3 // 60 x 100 x 4,3 // 60 x 140 x 4,3 cm 
• Weight: 8,31 kg // 12,44 kg // 17,81 kg
• Radiation type: Far infrared C radiation
• Radiation range: max. 3,5 m
• Infrared angle: up to 170°
• Overheating protection: Yes, max. 130°C (safety thermoswitch)
• Overvoltage protection: Yes
• IP22 protection against dripping water falling at an angle (up to 15°)
• Heating area: Up to 12 m² // 20 m² // 26 m²
• On / off via thermostat dial
• Integrated power cord
• Power plug: Shockproof plug
• For a permanent connection to the mains, the plug must be disconnected by a qualified professional. The warranty will remain valid. A direct connection of the heater to the mains may only be carried out in accordance with the legal guidelines by means of digital control and by an authorised person (master electrician).
• Cord length: 1,7 m
• Nominal heat-up time: 3,67 min.
• Nominal heat output (Pnom): 600 watts: 0,6 kW | 900 watts: 0,9 kW | 1200 watts: 1,2 kW
• Maximum continuous heat output (Pmax,c): 600 watts: 0,6 kW | 900 watts: 0,9 kW | 1200 watts: 1,2 kW
• Auxiliary power consumption at nominal heat output: 600 watt model: 0,613 kW | 900 watt model: 0,913 kW | 1200 watt model: 1,212 kW
• Protection class: I
• Rated current consumption in amperes: 600 watts: 2,61 A | 900 watts: 3,91 A | 1200 watts: 5,22 A
• Maximum efficiency: approx. 99% of the electrical energy used is converted into thermal output.
• Effective heating surface (m²) » 600 watts: 0,36 m² | 900 watts: 0,6 m² | 1200 watts: 0,84 m²
• Certifications: REACH, RoHS, EMC

The product is suitable for use as a heating system for buildings and living spaces in accordance with the requirements of Bill 19/16716 Art. 1 §23 Paragraph 1 No. 3 GEG and the Ecodesign Directive 2015/1188/EC in conjunction with an external control system. This product is only suitable for well-insulated rooms or occasional use. This product is not suitable as a main heating system. According to the Ecodesign Directive 2009/125/EC and Regulation (EU) 2015/1188, electric room heaters may only be installed, controlled and operated together with a digital thermostat control with the function "weekday control" and "window-open detection" or "adaptive control of the start of heating". In case of operation via an electronic thermostat, the mechanically integrated thermostat of the Konvi heater must always be set to its highest level (ON)!

Delivery Contents

• 1 x Konvi hybrid infrared panel heater
• 1 x Wall mount
• 1 x Instruction manual