VASNER Konvi Plus Rounded Hybrid Electric Heater with Thermostat

Hybrid Electric Heater with Thermostat & Rounded Corners | VASNER Konvi Plus

Product Features

• Symbiosis of infrared and convection
• Dual heating technology for quick warmth
• Internal convectors for 34% more heat than comparable hybrid heaters on the market create
• 100% infrared radiant heat
• Models: 600 / 1000 / 1200 watts
• Highly energy-efficient
• Integrated thermostat dial
• Stepless temperature control
• Modern rounded design
• Flat construction: Merely 4 cm of depth!
• With an extra-flat wall mount
• Overheating protection
• IP22 protection against dripping water falling at an angle (up to 15°)
• Material: 1 mm steel thickness (premium quality)
• Heats silently without a fan
• Can be combined with Konvi metal stands (stands not compatible with 1200 Watt model)

Description

VASNER presents Konvi Plus hybrid electric heaters with thermostat control and a modern rounded design. The decorative hybrid heating system for cosy warmth. What's special about the new VASNER wall panel? The combination of infrared radiation and convection technology enables an incomparably fast and efficient temperature increase. The simultaneous heating of the room air paired with gentle, direct heat waves lends the designer radiator dual heating power. The innovative hybrid electric heater with rounded corners is available with a maximum output of 600, 1000 and 1200 watts for room sizes up to 26 m². Via the integrated thermostat dial, the desired temperature can be set comfortably and steplessly and is then maintained automatically by the device. In the rare event of a safe temperature being exceeded, the electric wall heater with thermostat control has an overheating protection. For maximum safety during use. Although the hybrid infrared heating panel comprises two different technologies, it looks surprisingly sleek when mounted on the wall. This is because the radiant heater has a shallow housing depth of just 4 cm. This space-saving design is only possible thanks to the innovative heating mat, which is evenly integrated behind the entire surface of the panel. For a quick and easy mounting on the wall, the hybrid infrared heater is delivered with a special bracket. Simply install it in the desired place, plug the integrated power cord combined with a digital thermostat system into a standard household socket and enjoy the dual warmth of your VASNER Konvi Plus hybrid heating panel.

What is the difference between Konvi and Konvi Plus hybrid infrared heating panels?

The difference between the angular Konvi series and the rounded Konvi Plus series is purely visual. In terms of technology, effect and efficiency, both series are completely identical. With regard to heating power, there is no difference between the Konvi and Konvi Plus if the wattage of the compared units is identical.

Note: The 1200 watt version of the Konvi Plus Hybrid infrared heater is not compatible with the Konvi stands. The Konvi metal feet can only be combined with the 600 Watt and 900 Watt Konvi Plus hybrid heaters.

Note: Fixed Connection / Power Plug

• For a permanent connection to the mains, the power plug must be disconnected.
• The warranty of the device remains valid.
• A direct connection of the heater to the mains may only be carried out in accordance with the legal guidelines by means of digital control and by an authorised person (master electrician).

Note:
Maximum efficiency: Approx. 99% of the electrical energy used is converted into thermal output.
The VASNER Konvi Plus is the high-quality and effective heater for additional, cosy radiant warmth in living spaces. To estimate the wattage required to heat each m², please use our online calculator >>

The ErP table for this electric heating panel can be found in the section "Downloads".

Details on the Use of the Infrared Heating Panel

Optional: Automated control via digital thermostat:

• The hybrid infrared panel heater can also be controlled with an electronic thermostat in order to define individual heating programmes.
• If an electronic thermostat is also used, the mechanically integrated thermostat of the heating panel must always be set to the highest level (ON).
• Digital thermostat is not included (see accessories)
• Advantages of programmable thermostats: Automatic temperature change according to time & day, individually programmable + standard heating programs, quick selection settings, frost protection function
• Panel heaters have an open interface, i.e. they are compatible with every thermostat system
• Also ideal for integration into smart home environments
• The heating panel is compatible with thermostats of other manufacturers.
• Matching VASNER thermostats:
• VFTB wireless thermostat set
• VUT35 universal socket thermostat
• VFT35 wireless thermostat set

Models & Design:

• Flat (panel 4 cm deep + wall bracket: 2 cm deep)
• With air slits for additional convection
• With thermostat knob
• With rounded corners
• Colour: White, RAL 9003
• Material: Metal, steel
• Dimensions (H x W x D):
• 600 watts: 60 x 60 x 4 cm
• 1000 watts: 60 x 100 x 4 cm
• 1200 watts: 60 x 140 x 4 cm

Heating Technology: Infrared + Convection

Heating Filament:

• Latest infrared technology
• Twin heat conductor technology
• Advantages:
• Serpentine layout: No generation of additional magnetic fields
• Incorporation of the heating filament up to the edges of the panel heater
• Uniform surface temperature of the panel
• Efficient heat radiation
• No hot spots with higher temperatures

Convection:

• Openings at the bottom and top of the heater to let room air through
• Hollow space inside the device through which the air rises
• Special convection plates in the heater for even faster / more efficient heating of the air

Type of Infrared Radiation:

• Long-wave infrared C radiation

IP Protection

• IP22 protection against dripping water falling at an angle (up to 15°)

Application Areas:

• Closed indoor areas
• Bathroom (with enough distance to water sources)
• Bedroom
• Living room
• Kitchen / dining room
• Children's room
• Insulated basement
• Insulated attic
• Hobby room
• Office
• Conservatory
• Garden house
• Vacation home
• Tiny house
• Caravan

Safety Functions:

• Overheating protection max. 130°C (safety thermoswitch)

Heating Area:

• Use exclusively in closed interior spaces
• Example values shown based on good room insulation with a heating requirement of 50 watts/m²:
• 600 watts: up to approx. 12 m²
• 1000 watts: up to approx. 20 m²
• 1200 watts: up to approx. 24 m²
• * Data and calculations of heating areas are always dependent on several influencing factors, for example structural conditions such as ceiling height, room size, insulation, energetic conditions / building fabric, number of external walls etc.

Mounting:

• Ideally suited for wall mounting
• Incl. matching mounting bracket
• Fasten the bracket to the wall with the supplied screws and dowels.
• Slide heater in place
• Ideal position: Opposite the desired heating area in max. 3 - 4 m. distance

Current Load and Fuse:

• A standard household power line delivers about 3,5 kW at 16 amperes.
• Konvi Plus infrared panel heaters have an output of 600 - 1200 watts = 0,6 - 1,2 kW.
• Multiple heating panels can be connected per circuit.
• For simultaneous operation together with several other electrical devices in the same area, a second supply line may be necessary, depending on the total load.
• An additional power line can be installed by a qualified electrician.

Safety Distance to Flammable Materials:

• To the front: 30 cm
• Upwards / downwards + to each side: 10 cm
• 60 cm to water sources

Heating Costs:

At an average electricity price of 29 cents per kWh:

• 600 watts: 0,29 € / kWh * 0,6 kW ≈ 0,17 € / h ≈ 17 cents per hour
• 1000 watts: 0,29 € / kWh * 1 kW = 0,29 € / h = 29 cents per hour
• 1200 watts: 0,29 € / kWh * 1,2 kW ≈ 0,35 € / h ≈ 35 cents per hour

Technical Data

• Article: VASNER Konvi Plus hybrid electric heater with thermostat + rounded corners
• Colour: Signal white RAL 9003, silky matt
• Voltage: 230V / 50 Hz
• Output: 600 / 1000 / 1200 watts
• Latest infrared fiber technology
• Thermostat: integrated, with stepless dial
• Max. surface temperature: approx. 120°C
• Measurements (H x W x D): 60 x 60 x 4 cm // 60 x 100 x 4 cm // 60 x 140 x 4 cm
• Weight: 13 kg // 16,03 kg // 19 kg
• Thermal radiation type: Far infrared C radiation, longwave
• Radiation range: max. 3,5 m
• Beam angle: up to 170°
• Overheating protection: yes, max. 130°C (safety thermoswitch)
• Overvoltage protection: yes
• IP22 protection against dripping water falling at an angle (up to 15°)
• Heating area: up to 12 m² // 20 m² // 26 m²
• Integrated power plug
• Power plug: Shockproof plug
  For a permanent connection to the mains, the plug must be disconnected by a qualified professional. The warranty will remain valid. A direct connection of the heater to the mains may only be carried out in accordance with the legal guidelines by means of digital control and by an authorised person (master electrician).
• Cord length: 1,7 m
• Nominal heat output (Pnom): 600 watts: 0,6 kW | 1000 watts: 1,0 kW | 1200 watts: 1,2 kW 
• Maximum continuous heat output (Pmax,c): 600 watts: 0,6 kW | 1000 watts: 1,0 kW | 1200 watts: 1,2 kW
• Auxiliary power consumption at nominal heat output: 600 watt model: 0,613 kW | 1000 watt model: 1,011 kW | 1200 watt model: 1,213 kW
• Protection class: I
• Rated current consumption in amperes: 600 watts: 2,61 A | 1000 watts: 4,35 A | 1200 watts: 5,22 A
• Maximum efficiency: approx. 99% of the electrical energy used is converted into thermal output.
• Effective heating surface (m²) » 600 watts: 0,36 m² | 1000 watts: 0,6 m² | 1200 watts: 0,84 m²
• Certifications: REACH, RoHS, EMC

The product is suitable as a heating system for buildings and living spaces in accordance with the requirements of Bill 19/16716 Art. 1 §23 Paragraph 1 No. 3 GEG and the Ecodesign Directive 2015/1188/EC. This product is not suitable as a main heating system. This product is only suitable for well-insulated rooms or occasional use. The Konvi hybrid series has a built-in mechanical thermostat. According to Ecodesign Directive 2009/125/EC and Regulation (EU) 2015/1188, electric space heaters are only to be installed, controlled and operated together with a digital thermostat system with the function "weekday control" and "window-open detection" or "adaptive control of the start of heating". As the hybrid heater has an open interface, you can either use your own thermostat system, which may already be in use in your building, or use our VFTB thermostat system. In case of operation via an electronic thermostat, the mechanically integrated thermostat of the Konvi heater must always be set to its highest level (ON)! The VFTB thermostat system can be found below under accessories. 

Delivery Contents

• 1 x Konvi Plus rounded hybrid electric heater with thermostat
• 1 x Wall mount
• 1 x User manual
• 1 x Mounting accessories (screws + dowels)