VASNER Konvi VE Hybrid Vertical Electric Heater

Hybrid Vertical Electric Heater with Thermostat | VASNER Konvi VE

Product Features

• Space-saving, vertical design
• Hybrid heating: 100% infrared warmth + convection
• Convector panels inside the unit for a 34% higher thermal efficiency than comparable products
• For an even quicker temperature increase in cool rooms
• Models: 1000 / 1200 watt heat output
• Flat construction (4 cm housing depth)
• With thermostat control
• Rotary knob for stepless temperature regulation
• VASNER wall mount - extra flat
• With overheating protection

Description

VASNER Konvi VE vertical electric heaters are a space-saving solution for even faster heating. Thanks to the innovative combination of direct infrared radiation with proven convection, the hybrid infrared panel provides dual heating power. On the one hand, the people present benefit from sun-like infrared waves. While on the other hand, the room air is simultaneously heated inside the device. This allows you to reach the desired temperature even faster. The impressive 1000 / 1200 watt heating output is packaged in an ultra-flat casing (4 cm housing depth) with a slim, vertical design. So you can also choose narrow sections of wall to mount the hybrid infrared convection heater. For this purpose, the vertical electric heater comes equipped with a conventional power plug and a practical wall mount - for a quick and easy installation. The hybrid vertical electric heaters can also be controlled easily using the integrated thermostat. The rotary knob is used to switch the unit on and off as well as steplessly set the ideal room temperature. Your desired temperature is then automatically maintained by the hybrid infrared heating system. If in rare cases excessive temperatures should occur, the vertical infrared radiators have an integrated overheating protection. For even more safety during use.

Note: Fixed Connection / Power Plug

• For a permanent connection to the mains, the power plug must be disconnected.
• The warranty of the device remains valid.

Note:
Maximum efficiency: Approx. 99% of the electrical energy used is converted into thermal output.
The VASNER Konvi VE is the high-quality and effective heater for extra infrared warmth in living spaces. To estimate the wattage required to heat each m², please use our online calculator >>

The Konvi hybrid series has a built-in mechanical thermostat. Within the scope of Regulation (EU) 2015/1188, electric room heaters must be controlled and operated via electronic room temperature controllers (thermostats) with a "weekday control" and "window-open-detection" function or "adaptive control of the start of heating". For example, with the matching thermostat set VASNER VFTB you can optimally control infrared heating panels. As the hybrid heater has an open interface, you can either use your own thermostat system, which may already be in use in your building, or use our VFTB thermostat system. In case of operation via an electronic thermostat, the mechanically integrated thermostat of the Konvi heater must always be set to its highest level (ON)! The VFTB thermostat system can be found below under accessories.

The ErP table for this electric heating panel can be found in the section "Downloads".

Technical Data

• Product: VASNER Konvi VE hybrid vertical electric heater with thermostat
• Design: vertical, with thermostat dial
• Colour: RAL 9003 signal white
• Voltage: 230V / 50 Hz
• Heating power: 1000 / 1200 watts
• Latest infrared technology
• Surface temperature: up to approx. 110°C
• Dimensions (H x W x D): 100 x 60 x 4 cm // 140 x 60 x 4 cm
• Weight: 17 kg // 19 kg
• Radiation type: Far C infrared radiation, longwave
• Radiation range: up to 3,5 m
• Beam angle: up to 170°
• Overheating protection: yes
• Overvoltage protection: yes
• IP20 (not splash-proof)
• Heating area Konvi VE: up to 26 m² (depending on structural conditions)
• On / Off via thermostat dial
• Stepless temperature control
• Integrated power cord
• Power plug: Shockproof plug
  For a permanent connection to the mains, the plug must be disconnected by a qualified professional. The warranty will remain valid.
• Cord length: 1,9 m
• Nominal heat output (Pnom): 1000 watts: 1,0 kW | 1200 watts: 1,2 kW
• Maximum continuous heat output (Pmax,c): 1000 watts: 1,0 kW | 1200 watts: 1,2 kW
• Auxiliary power consumption at nominal heat output: 1000 watt model: 1,011 kW | 1200 watt model: 1,119 kW
• Protection class: I
• Rated current consumption in amperes: 1000 watts: 4,35 A | 1200 watts: 5,22 A
• Maximum efficiency: approx. 99% of the electrical energy used is converted into thermal output.
• Effective heating surface (m²) » 1000 watts: 0,6 m² | 1200 watts: 0,84 m²
• Certifications: REACH, RoHS, EMC

Suitable as a heating system for buildings and living spaces according to requirements of the draft law 19/16716 article 1 §23 paragraph 1 no. 3 GEG.

Mandatory notice according to EU Regulation Ecodesign 2015/1188: This product is not suitable as a main heating appliance. This product is only suitable for well insulated rooms or for occasional use.

Delivery Contents

• 1 x Konvi VE Hybrid vertical electric heater with thermostat
• 1 x Wall mount
• 1 x Mounting accessories (dowels + screws)
• 1 x Instruction manual