Steel cable set for VASNER Citara & InfraRaster infrared heaters

Preview: Stahlseil Set zur Infrarotheizung Deckenabhängung - geeignet für VASNER Citara & InfraRaster

Preview: Flexibel höhenverstellbare Stahl Seilaufhängung Deckenabhängung für Citara & InfraRaster Infrarotheizung VASNER

Preview: Anbringung der Montage Gewindeschrauben an der Infrarot Heizplatte Infrarotheizung

Preview: Draufsicht Infrarot Heizpaneel Stahlseil Deckenabhängung Montage Installation Stahl Seile

Preview: Abhängung der Infrarotheizung von der Decke bis max. 4 Meter - flexibel höhenverstellbar

Preview: Seitenansicht Stahlseile Deckenabhängung für VASNER Citara & InfraRaster Serien

Preview: Montage Installation des Deckenankers zur Abhängung von VASNER Citara / InfraRaster Infrarotheizung

Preview: VASNER steel cable set for infrared heating ceiling suspension up to 4 m

Preview: Stahlseil Set Citara / InfraRaster Infrarotheizung - Einhängen des Infrarot-Heizpaneels

Preview: Stahlseil Set Citara / InfraRaster Infrarotheizung - Befestigung des Infrarot-Heizpaneels

Preview: Stahlseil Set Citara / InfraRaster Infrarotheizung - Drehen der Gewindestifte

Preview: Schraubhaken - Eindrehen der Gewindesifte zur Befestigung an der Infrarot Heizplatte

Preview: Schraubhaken - Justierung der Länge der Stahlseile

Stahlseil Set zur Infrarotheizung Deckenabhängung - geeignet für VASNER Citara & InfraRaster

Flexibel höhenverstellbare Stahl Seilaufhängung Deckenabhängung für Citara & InfraRaster Infrarotheizung VASNER

Anbringung der Montage Gewindeschrauben an der Infrarot Heizplatte Infrarotheizung

Draufsicht Infrarot Heizpaneel Stahlseil Deckenabhängung Montage Installation Stahl Seile

Abhängung der Infrarotheizung von der Decke bis max. 4 Meter - flexibel höhenverstellbar

Seitenansicht Stahlseile Deckenabhängung für VASNER Citara & InfraRaster Serien

Montage Installation des Deckenankers zur Abhängung von VASNER Citara / InfraRaster Infrarotheizung

VASNER steel cable set for infrared heating ceiling suspension up to 4 m

Stahlseil Set Citara / InfraRaster Infrarotheizung - Einhängen des Infrarot-Heizpaneels

Stahlseil Set Citara / InfraRaster Infrarotheizung - Befestigung des Infrarot-Heizpaneels

Stahlseil Set Citara / InfraRaster Infrarotheizung - Drehen der Gewindestifte

Schraubhaken - Eindrehen der Gewindesifte zur Befestigung an der Infrarot Heizplatte

Schraubhaken - Justierung der Länge der Stahlseile

From € 29,⁹⁰^*

Prices incl. VAT plus shipping costs

Order number: VA101000318
Benefits:
- 30 days return policy
- Fast shipping
- Direct purchase from the manufacturer
- Buyer protection: PayPal & Amazon Pay
- Free shipping from 49,- € DE
  from 99,- € AT, NL, LU, BE

Jetzt vom Experten beraten lassen

+49 (0)5246 - 93 55 625

info@vasner.com

Steel cable set for Citara & InfraRaster infrared heaters, stepless ceiling suspension up to 4 m... more

Close menu

Product information "VASNER steel cable set for infrared heating ceiling suspension up to 4 m"

Steel cable set for Citara & InfraRaster infrared heaters, stepless ceiling suspension up to 4 m | VASNER

Product features

High-quality steel cable set for safe, stepless ceiling suspension of VASNER Citara and InfraRaster infrared heaters
Four robust steel cables (2 mm diameter each) with pre-assembled mounting sleeve for precise length adjustment
One grub screw with M6 thread and integrated slide lock per cable for flexible height adjustment
Available in two versions: 2 m or 4 m cable length and infinitely adjustable - suitable for flexible suspensions from approx. 0.5 m to max. 4 m
Maximum secure and stable suspension with minimum installation effort
Additional fastening materials (4 screws & 4 dowels) included in the scope of delivery
Subsequent height adjustment possible at any time - simply by pressing a button on the Slide-Lock sleeve
Ideal for ceiling suspension in rooms with high ceilings, halls, chapels, etc.
ATTENTION: Only suitable for VASNER infrared heaters of the Citara (M, M Plus, M RX, T, T Plus, T RX) & InfraRaster series

Description

This VASNER steel cable set was specially developed for the safe and flexible ceiling suspension of infrared heaters from the Citara and InfraRaster series. Thanks to four high-quality steel cables (2 mm thick) and the intelligent Slide-Lock locking mechanism, the height of any heater can be adjusted as required - continuously, quickly and reliably. The included M6 threaded pins with integrated locking sleeve allow the suspension height to be adjusted without tools - even after initial installation. Simply pressing down the sleeve is enough to change the height of the heater. This allows the heat output to be flexibly adapted to new requirements at any time. Available in two length variants (2 m & 4 m) and infinitely adjustable, the set allows the heater to be suspended from approx. 50 cm to 4 m - ideal for use in high rooms, industrial halls, chapels, entrance areas and other demanding environments. The length of wire that is not required can simply be rolled up and stored on the back or shortened with a side cutter when it is finally positioned. Caution: After shortening, it is no longer possible to extend the wire.

All components are carefully matched to each other and made of high-quality materials - for maximum safety and a long-lasting, stable attachment of your VASNER infrared heater.

*Depending on the attached length of the cables/heater, the length of the heating connection cable must be professionally extended by a qualified electrician using a fixed connection.

Technical data

Product name: VASNER steel cable set for Citara & InfraRaster infrared heaters
Material: Steel cables (2 mm thick) with mounting sleeves, threaded pins M6 thread incl. Slide-Lock locking mechanism, screws, dowels
Length of the steel cables: 2 m // 4 m - Suspension height can be infinitely adjusted by rolling up the cable length not required or shortening the cables permanently
Dimensions (H x W x D) - Steel cables incl. threaded pins: 1.5 x 203 x 1.5 cm // 1.5 x 403 x 1.5 cm
Suspension height: Infinitely adjustable - for suspension from approx. 50 cm to max. 4 m
Weight: 0.26 kg // 0.39 kg

Scope of delivery

4 steel cables incl. mounting sleeves for ceiling suspension of VASNER Citara & InfraRaster infrared heaters
4 threaded pins M6 thread incl. Slide-Lock locking device
4 screws
4 dowels

Herstellerangabe

VASNER
MankeTech GmbH
Stahlstraße 27
33415 Verl, Germany
Mail: info@vasner.com

Series:	Citara M, Citara T RX, Citara M RX, Citara M Plus, Citara T, Citara T Plus, InfraRaster
Installation / Use:	Ceiling

Related links to "VASNER steel cable set for infrared heating ceiling suspension up to 4 m"

Further products by VASNER

Close menu

Sicherheit

Warnings-and-Safety-Instructions-steel-cables-Citara-InfraRaster-All-Languages.pdf

Included languages / Languages included:
BG - BULGARIAN: ВАЖНИ ИНСТРУКЦИИ ЗА БЕЗОПАСНОСТ
CS - CZECH: DŮLEŽITÉ BEZPEČNOSTNÍ POKYNY
DA - DANISH: VIGTIGE SIKKERHEDSINSTRUKTIONER
DE - GERMAN: IMPORTANT SAFETY INSTRUCTIONS
EL - GREEK: ΣΗΜΑΝΤΙΚΕΣ ΟΔΗΓΙΕΣ ΑΣΦΑΛΕΙΑΣ
EN - ENGLISH: IMPORTANT SAFETY INSTRUCTIONS
ES - SPANISH: INSTRUCCIONES DE SEGURIDAD IMPORTANTES
ET - ESTONIAN: OLULISED OHUTUSJUHISED
FI - FINNISH: TÄRKEITÄ TURVALLISUUSOHJEITA
FR - FRENCH: CONSIGNES DE SÉCURITÉ IMPORTANTES
GA - IRISH: TREORACHA TÁBHACHTACHA SÁBHÁILTEACHTA
HR - CROATIAN: VAŽNE SIGURNOSNE UPUTE
HU - HUNGARIAN: FONTOS BIZTONSÁGI UTASÍTÁSOK
IT - ITALIAN: IMPORTANTI ISTRUZIONI DI SICUREZZA
LT - LITHUANIAN: SVARBIOS SAUGOS INSTRUKCIJOS
LV - LATVIAN: SVARĪGAS DROŠĪBAS INSTRUKCIJAS
MT - MALTESE: STRUZZJONIJIET IMPORTANTI DWAR IS- SIGURTÀ
NL - DUTCH: BELANGRIJKE VEILIGHEIDSINSTRUCTIES
PL - POLISH: WAŻNE INSTRUKCJE BEZPIECZEŃSTWA
PT - PORTUGUESE: INSTRUÇÕES DE SEGURANÇA IMPORTANTES
RO - ROMANIAN: INSTRUCȚIUNI IMPORTANTE DE SIGURANȚĂ
SK - SLOVAK: DÔLEŽITÉ BEZPEČNOSTNÉ POKYNY
SL - SLOVENIAN: POMEMBNA VARNOSTNA NAVODILA
SV - SWEDISH: VIKTIGA SÄKERHETS INSTRUKTIONER